6 Tips for Skylight Placement in Your Home

*This is a guest post all about roof skylights and skylight placement

Ready to let more light enter your life – and home? Then roof skylights is the answer. But it’s not as simple as you may think. There are quite a lot of things to consider before dunking a hole in your roof for some extra sun rays. Go for an eco-friendly skylight that not only blends well with your home but also, the planet.

Here are a few tips to bear in mind before getting on with the whole skylight experience.

Don’t compromise on quality

Consider water tightness, energy efficiency, load resistance, and sound reduction. These and a lot of other factors decide whether your selected skylight needs to be put up or not. Inquire and explore as much as you can before making the right decision. Think about UV coatings, shading, and ventilation. Also think about waterproof insulation, because if you’re putting a hole in your ceiling, it needs to be well-protected and never at risk during heavy rains.

Choose the placement wisely

The smart move is to have a space plan before cutting out holes in your roof. The placement of rafters determines the placement of your skylight. You are aware of your home better than anyone, which means you know the amount of light a room needs. Balancing a larger room or spacing up a smaller one, anything can be done with the right window placement. Set your plan accordingly instead of regretting it later on.

Moreover, you need to consider the right day for the job. Bad weather can earnestly ruin your skylight project if you encounter moisture midway.

Be prepared for dangerous situations

There is always the danger of falling off if the situation is not entirely analysed and understood beforehand. Make sure to choose the right ladder for the job – with appropriate height. Support your ladder using roof jacks for greater safety.

Moreover, you need to wear shoes with accurate traction to avoid slipping off. Don’t take skylight instalment casually and be prepared to work at a considerable height. Your gear determines your safety, so make sure you have the right one.

Know your slope before purchasing flashing

Like every other factor, you also need to consider your slope before buying your flashing. There is a wide variety of flashing kits that are available for each pitch. So make sure you’ve done your research thoroughly to come to an educated and accurate decision.

Waterproof your flashing

In areas with heavy rain or snow, adding a waterproof flashing to your regular one is the wisest move. Avoid unwanted stress of cleaning by shielding your skylight and divert natural downpour the way you wish. Enjoy your clear view without having to worry about cleaning it.

Start installing from the inside

The best practice is to start marking your window placement from the inside. Simply drive four nails through the roof in the box corners to mark the window territory. This will enable you to determine the placement accurately and help you have a stress-free installation experience.

Your skylight makes a statement for your living space, so make sure it is done the right way to enjoy that natural flow of light.